As a common tool in life, Hammer Drill 26MM are used more often. After each use, how do we store them in order to be more conducive to its use?

1: Remove accessories

After the power tool is used, it is necessary to develop the habit of dismantling after use, especially the drill bits of various percussion drills and electric drills, which need to be dismantled in time. When some drill bits are pushed in, they will be contaminated with some moisture. Moisture, if the drill bit has not been removed and not used for a long time, the water will enter the motor along the direction of the drill bit, which will have a certain impact on the use of the equipment.

2: Classified storage

When Hammer Drill 26MM are sold, they are usually equipped with a tool box. After all kinds of tools are used, they need to be placed in the tool box in an orderly manner. All kinds of tools should not be stored randomly. The process of moving and transporting in the tool box In this case, it will cause some wear and tear between various tools, resulting in scratches on the metal shell of the power tool, or even breakage.

3: Keep dry

Because some Hammer Drill 26MM are used in a humid environment, there is more water vapor in the air, and the tool accessories and housing will have a certain amount of moisture. After use, these obvious moisture need to be wiped. Dry, and then proceed to storage. For the large particles of dust that appear in use, the dust needs to be processed, and then placed in the storage tool box of the power tool in order to avoid metal corrosion when it is used next time.